Page 22 of 28 9034-SD Owner’s Manual •
••
• (V 2.0)
Technical Specifications Table 4. Card - Technical Specifications
Number of Inputs 3
Input Type Differential, Common Mode Rejection (5V AC)
Video Inputs SD: Composite, Component YPbPr (BetaCam™,
MII™, SMPTE/N10), RGB, and Y/C
Conversion Bit Depth 12-Bits
SD Color Separation 5-Line Adaptive Comb or Notch Filter
Frequency Response SD: Y- 0-30MHz ± 0.25db PbPr 0-15 MHz ±
Differential Phase SD: < ±0.4° typical
Differential Gain SD: < ±0.4% typical
Noise < -64dB (Luma Flat Field)
< -61dB (Luma Ramp)
Analog Front End Crosstalk Within Noise Floor Measurement
Analog Video
Input
Return Loss > 20dB to 30MHz
Category Parameter Specification
Number of Outputs 2:SD-SDI BNC per IEC 60169-8 Amendment 2
Impedance 75Ω
Return Loss > 15 dB at 5MHz – 270MHz
Signal Level 800 mV ±10%
DC Offset 0 Volts ±50 mV
Jitter SD: <0.06UI (all outputs)
Serial Digital
Video Outputs
Overshoot <0.2% of amplitude
Standard SMPTE 276M
Number of Inputs 8 unbalanced
Input Level 0.1 to 2.5V p-p (5V p-p tolerant)
Input Impedance 75Ω
Return Loss > 12dB 100kHz to 6MHz
Equalization Automatic to 1000m with Belden 1694A (or
equivalent) @ 48kHz AES signal
AES Audio
Input
Sample Rate 48KHz