Card Control and Status
Card Status
The card indicates the status of the input signal with the four blue LEDs labeled with the different supported formats (1080, 720, 625, 525). When the card has locked to a particular input format, that LED will be illuminated. When the card has not locked to a particular video format, the card will search all possible formats, and the lights will cycle rapidly.
Menu Navigation
The card can be configured from a menu system built in to the front card edge. This provides an intuitive and easy to use method for exploring and using the features of the card.
The menu is navigated by using the toggle switch and the two push buttons. The lower button is the “Enter” button to enter a submenu, and the upper button is the “Exit” button to exit a submenu. Moving the toggle switch up or down moves up or down in menu choices, and pressing the buttons moves in or out of sub menus.
The menu LEDs will illuminate from top to bottom to indicate increasing depth in the menu.
Menu Structure
Video Submenu
Menu Structure |
| Parameter Type | |
Vid | Proc | Unty | Proc Unity |
|
| Gain | Proc Gain |
|
| Lift | Proc Lift |
|
| Sat | Proc Sat |
|
| Phas | Proc Phase |
| Dec | SDIN | Decoder SD input |
|
| HDIN | Decoder HD input |
|
| PED | Pedestal - SD Setup |
Proc Unity
Resets all of the proc controls to unity value.
Proc Gain
This is Luma (Y channel) gain, expressed as a percentage. It ranges from 0.0% to 200.0% in 0.1% steps.
Proc Lift
This is Luma (Y channel) offset, expressed as an actual video value ranging from
Proc Saturation
This is Chroma (C channel) gain, expressed as a percentage. It ranges from 0.0% to 200.0% in 0.1% steps.
Page 14 of 28 | 9034 Owner’s Manual • (V 2.0) |
