Cobalt Networks 9034 owner manual Video Signal, Controls, AES Input, Video Proc

Menu	Item	Format	Description
		Composite	Selects the format of
			input SD analog video, so
		Y/C
			the decoder can properly
		YPbPr BetaCam
	SD Input Type		decode the signal.
		YPbPr MII
Video Signal		YPbPr SMPTE
Controls
	HD Input Type	GBR	Selects the format of
			input HD analog video.
		YPbPr
			Specifies the amount of
	SD Composite	0.0 or 7.5 IRE of Setup	setup (pedestal) in the
	Contains		input video. It will be
			removed by the decoder.

Menu	Item	Format	Description
			This will bypass sample
		On	rate conversion on AES.
			If bypassed AES rate
	AES Pair 1-8 SRC
			must match input video
	Bypass		rate or audio dropout will
		Off	occur. SRC must be
AES Input			bypassed to embed Dolby
Controls			encoded audio.
	AES Pair 1-8	On	AES output pair X will
			be a low latency copy of
	Passthrough	Off
			AES input pair X.
	AES Pair 1-8	On	Embeds with low (<1 ms)
	Zero Delay		latency. Overrides routing
		Off
			choices.

	Menu		Item	Format	Description
			Video Gain	Range 0-2000	Gain applied to Y (Luma).
					1000 is unity.
	Video Proc
			Video Lift	Range (-999) – 999	Lift applied to Y (Luma),
					in 10 bit code value.
			Color Gain	Range 0-2000	Gain applied to C
					(Chroma). 1000 is unity.
			Color Phase	Range (–360) – 360	Phase of C (Chroma) in
					degrees.
			Reset to Unity	Confirm	Resets all of the proc
					controls to unity.
9034 Owner’s Manual •		(V 2.0)			Page 21 of 28