LEDs
The
As selections are made in the menus, (refer the subsequent chapter for complete menu descriptions), the LEDs display the status of the input signals. Descriptions are provided in the following table:
LED | Color |
| Location | Display and Description |
|
|
|
|
|
Lock | Green |
| Top of the | When illuminated there is a valid AES/EBU signal at the input. |
| card |
| ||
|
|
|
| |
|
|
|
|
|
|
|
| Second | When illuminated a valid AES/EBU signal is not present |
No Lock | Red |
| from the |
|
|
|
| top |
|
|
|
|
|
|
|
|
| Third from | When illuminated this indicates that the cable EQ has been inserted |
EQ | Yellow |
| by pressing SW1 or that feature has been enabled through | |
| the top | |||
|
|
| Dashboard. | |
|
|
|
| |
|
|
|
|
|
Com | Green |
| Fourth from | When illuminated this indicates that the 9252 is communicating to |
Activity |
| the top | Dashboard through the CAN bus. | |
|
| |||
|
|
|
|
|
Error | Red |
| Fifth from | When illuminated this indicates that there is an error in the |
| the top | communications to Dashboard through the CAN bus. | ||
|
|
| ||
|
|
|
|
|
Table 1. Status LED Descriptions
12