Cobra Electronics 29 LTD SE specifications Home And Office Set-Up Temporary Mobile Set-Up

Home And Office Set-Up Temporary Mobile Set-Up

Base Station

Operation

(From 120V AC

House Current)

Base Station Operation

(From 120V AC House Current)

To operate your transceiver from home or office you will need a 13.8 volt DC Power Pack rated at a minimum of 2 amps, and a properly installed base station antenna.

Warning!

Do not attempt to operate this transceiver by connecting it directly to 120v ac.

Note

For further information call Cobra Customer Service 773.889.3087.

1Simply connect the red (+) and black (-) leads of the transceiver to the corresponding terminals of the power pack.

2Plug power cable into back of unit marked “Power”. Be sure to observe polarity markings.

3Connect properly installed and matched base station antenna.

Temporary Mobile Operation

For temporary mobile operation you may want to purchase an optional automobile power adapter from your COBRA dealer.This adapter and a magnetic mount antenna allow you to quickly “install” your transceiver for temporary use.

Temporary Mobile Set-Up

26 27