Operation

Selecting A

Selecting A Channel

 

Channel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operation

NB-ANL/ANL/OFF (Noise

NB-ANL/ANL/

Blanker/Automatic Noise Limiter) Switch

OFF (Noise

 

Blanker/

 

Automatic

 

Noise Limiter)

 

Switch

1Switch to NOR to select desired channel.

S-MeterS-Meter

Swings proportionately to strength of incoming signal when receiving.

1The S/RF-SWR-CAL switch must be in the S/RF position to read the meter.

1When switched to ANL the Automatic Noise Limiter is activated.This helps reduce noise created by the vehicle’s electronics.

When switched to NB/ANL position the RF Noise Blanker is also activated,providing increased noise filtration.

When switched to OFF position all noise filtration will be turned off.

Note

The RF noise blanker is very effective in reducing repetitive noises such as ignition interference.

14

15

Page 8
Image 8
Cobra Electronics 29 LTD SE Selecting a, Channel, OFF Noise, Blanker, Automatic, Noise Limiter, Switch, MeterS-Meter