Manuals / Cobra Electronics / Communications / Two-Way Radio

Cobra Electronics 29 LTD SE specifications Installation, LocationLocation, Mounting and Connection

Models: 29 LTD SE

1 21

Download 21 pages 30.46 Kb

Page 2

Image 2

Installation

LocationLocation

Plan location of transceiver and microphone bracket before starting the installation.

Select a location that is convenient for operation, yet does not interfere with the driver or passenger.

The transceiver is usually mounted to the underside of the dash with the microphone bracket beside it.

Installation

Mounting and Connection

Note

The transceiver is held in

the universal mounting bracket by two thumbscrews which allow for adjustment at a convenient angle.

The bracket includes two self-tapping screws and star washers. The mounting must be mechanically strong, conveniently located.

Mounting and Connection

1Hold the radio with the mounting bracket in the exact desired location. If there is no interference, remove the bracket and use it as a template to mark the location for the mounting screws.

2Drill the holes and secure the bracket.

3Connect the antenna cable plug to the receptacle marked “ANT” on the back of the unit.

continued

Page 2

Image 2

Cobra Electronics 29 LTD SE specifications Installation, LocationLocation, Mounting and Connection

Contents

Antennas ContentsInstallation Mounting and Connection InstallationLocationLocation Mounting and ConnectionInstallation CB Antenna Marine InstallationAntennas Ignition Noise Interference CB AntennaOperation Setting Channel SelectorSetting Channel Selector Turning OnCalibrate for SWR Standing Wave Ratio Select channel Switch to the CAL positionCalibrate For SWR Standing Wave Ratio Meter located on the rightTo Receive To ReceiveChannel SwitchSelecting a OFF NoiseRF Gain Control Bright/Dim SwitchBright/Dim Setting Squelch Setting Delta-Tune Setting SquelchSetting Delta-Tune Setting TalkBack Setting DynamikeSetting Dynamike TransmitRF Meter RF MeterExternal Speaker External SpeakerPA Public AddressTemporary Mobile Set-Up Home And Office Set-Up Temporary Mobile Set-UpBase Station Operation From 120V AC House Current Base Station Operation From 120V AC House CurrentHow Your CB Can Serve You Few Rules You Should Know Channel Emergency MessagesCB 10-Codes Standard questions and answers. These codesCB 10-Codes Noisy areas. Following are some of the moreFrequency Ranges For Products Purchased in the U.S.A Limited One Year Warranty Optional AccessoriesFor Products Purchased in Canada Optional Accessories CB transceiver If You Think YouNeed ServiceCB Story Ordering from Canada Customer SupportAutomated Help Desk Ordering from U.S.A