Intercom Mode From Handset | Cobra Electronics CP-9135 specification

CP9135 manual layout.6 10/20/98 12:41 PM Page 34

Operation

Intercom Mode

From The

Handset

Note

Intercom may be initiated from either the handset or the base .

Intercom Mode From The Handset

Your CP-9135 can serve as an intercom between the base and the handset. To utilize this feature:

1 Push and release Intercom button. The		LED
will illuminate.		Intercom
will illuminate.

Intercom Mode From The Base	Intercom Mode
	From The Base

		Note
		To initiate INTERCOM while on
			Hold
Intercom		a call,push and release
Intercom		button.Then push and release
Page/Find		button.Then push and release
1 Push and release	button. The	In Use
1 Push and release	button. The	LED will Page/Find
		Intercom	button.
flash on the base.			button.
flash on the base.
		Proceed following INTERCOM
		Proceed following INTERCOM
		instructions.
		Note
		Only the handset can end
		INTERCOMmode. Push and
		release Intercom button to end.

Low Batt

2The Intercom and In Use LED will light on the base. Four beeps will emit from the base.

3Begin talking.

2The Intercom LED on handset will flash and handset will beep.

Page 17

Image 17

Cobra Electronics CP-9135 Intercom Mode From Handset, Intercom Mode From The Handset, Intercom Mode From The Base

Contents

What’s Included with Your CP-9135 FCC Information Included AccessoriesIf You Think You Need Service 22 23 Controls and Indicators Our Thanks to YouCustomer Support Operating Your CP-9135 How to Use Your Cobra CP-9135 900 MHz Cordless Telephone Important Safety Instructions Quick Set-Up Guide Installation Quick Set-Up Guide Quick Set Up Guide Instructions Wall MountingWall Mounting Instructions Plug 6phone cord into Line 1-2 jack on rear of base Real Time Line Status Base & Handset OperationReal Time Line Status/Base & Handset Line 1 or Line 2 will flash if there is a line on hold, or Pick up handset Answering Calls From The HandsetAnswering Calls From The Handset Answering Calls From The Base Answering Calls From The BaseLine button Button Placing Calls Placing Calls From HandsetPlacing Calls From The Handset Placing Calls From The Base Flash ChannelSelection Secur-Loc Hearing Aid Compatibility ControlMute Last Number Delayed Redial Last Number Delayed RedialLast Number Instant Redial Last Number Instant Redial Storage Memory NumberMemory Number Storage Push and release button once To Find Memory Number DialingMemory Number Dialing To Find The Handset Intercom Mode Intercom Mode From HandsetIntercom Mode From The Handset Intercom Mode From The Base Hold Button On Handset Base Person using the handset should pushHold Button On The Handset and Base Handset Base Conference Calling From Handset Base Conference Calling Using Both Lines Handset Battery Recharging Ringer SwitchesRinger Switches Handset Battery Recharging Private Call Voice Scrambling Battery Saver Battery Saver Voice ScramblingPrivate Call Private Call prevents other cordless phones or Handset Battery Disposal Handset Battery DisposalReplacing Handset Batteries Replacing Handset Batteries SprOperationadLeft Spread RightOperationPage CleaningHeadset Operation ChargingContacts Handset seemsdead Troubleshooting Frequently Asked QuestionsPhone is dead Are power adapter and phone cord connected? Other cordless phones Fluorescent fixtures Frequently Asked Questions Limited One Year Warranty Accessories Accessory Order Form

Operation

Intercom Mode

From The

Handset

Intercom Mode From The Handset

Intercom Mode From The Base

Intercom Mode

flash on the base.