Ringer Switches, Tone/Pulse Tone/Pulse | Cobra Electronics CP-9135

CP9135 manual layout.6 10/20/98 12:41 PM Page 40

Operation

Ringer Switches

Note

When ringer switches are off you can detect an incoming call by the flashing Line 1 or Line 2 LEDs .

Ringer Switches

RINGER ON/OFF switches are located on the base. One switch is for Line 1,the other is for Line 2.

When ON,each switch provides a distinct ring for each line. When set to OFF, no ring will sound from the base or handset.

Handset Battery Recharging

When the handset battery needs recharging:

Handset Battery

Recharging

Note

Replacement batteries are available from Cobra. See Accessories section on page 48.

Tone/Pulse Tone/Pulse

The CP-9135 can be used either as tone or pulse, depending upon your phone service.

Low Batton handset will flash and 2 beeps will be heard every 30 seconds for 2 minutes. Return to base for recharging. Handset will shut off at the end of the 2 minute period, terminating a conver- sation if the handset is in TALK mode.

Page 20

Image 20

Cobra Electronics CP-9135 operating instructions Ringer Switches, Handset Battery Recharging, Tone/Pulse Tone/Pulse

Contents

What’s Included with Your CP-9135 FCC Information Included AccessoriesIf You Think You Need Service 22 23 Controls and Indicators Our Thanks to YouCustomer Support How to Use Your Cobra CP-9135 900 MHz Cordless Telephone Operating Your CP-9135 Important Safety Instructions Installation Quick Set-Up Guide Quick Set Up Guide Quick Set-Up Guide Wall Mounting InstructionsWall Mounting Instructions Plug 6phone cord into Line 1-2 jack on rear of base Operation Real Time Line Status Base & HandsetReal Time Line Status/Base & Handset Line 1 or Line 2 will flash if there is a line on hold, or Pick up handset Answering Calls From The HandsetAnswering Calls From The Handset Answering Calls From The Base Answering Calls From The BaseLine button Button Placing Calls From Handset Placing CallsPlacing Calls From The Handset Placing Calls From The Base Channel FlashSelection Secur-Loc Hearing Aid Compatibility ControlMute Last Number Delayed Redial Last Number Delayed RedialLast Number Instant Redial Last Number Instant Redial Memory Number StorageMemory Number Storage Push and release button once Memory Number Dialing To FindMemory Number Dialing To Find The Handset Intercom Mode From Handset Intercom ModeIntercom Mode From The Handset Intercom Mode From The Base Person using the handset should push Hold Button On Handset BaseHold Button On The Handset and Base Handset Base Conference Calling Using Both Lines Conference Calling From Handset Base Ringer Switches Handset Battery RechargingRinger Switches Handset Battery Recharging Battery Saver Voice Scrambling Private Call Voice Scrambling Battery SaverPrivate Call Private Call prevents other cordless phones or Handset Battery Disposal Handset Battery DisposalReplacing Handset Batteries Replacing Handset Batteries Cleaning SprOperationadLeft Spread RightOperationPageHeadset Operation ChargingContacts Handset seemsdead Troubleshooting Frequently Asked QuestionsPhone is dead Are power adapter and phone cord connected? Other cordless phones Fluorescent fixtures Frequently Asked Questions Limited One Year Warranty Accessory Order Form Accessories

Cobra Electronics CP-9135 Ringer Switches, Handset Battery Recharging, Tone/Pulse Tone/Pulse

Models: CP-9135

Operation

Ringer Switches

Ringer Switches

Handset Battery Recharging

Handset Battery

Recharging

Tone/Pulse Tone/Pulse