300 Watt
POWER INVERTER
MODELCongratulations
Thank you for purchasing the CPI 300 Power Inverter from Cobra®. When used properly, your unit will give you many years of reliable service. The operating features of your CPI 300 include:
• | Automatic thermal |
| • | Dual AC receptacle |
| protection/shutdown | • | Low battery alarm | |
• | Reverse polarity protection • | Low battery shutdown | ||
| power indicator |
| ||
|
|
| fault indicator | |
|
|
| ON/OFF POWER | |
AC Output AC Output | POWER | switch | battery | |
|
| FAULT |
| cable |
|
|
|
| |
|
| OFF |
| terminals |
|
| ON |
| |
|
|
|
|
For Best Results
Your CPI 300 must be installed and used properly in order to provide the best possible results. Please read all instructions carefully before installing and using the unit. Pay special attention to CAUTION and WARNING statements in this manual.
CAUTION statements specify conditions that could cause damage to the unit or other equipment.
CAUTION
WARNING statements identify conditions that could result in person injury or loss of life.
INTRODUCTION
Cobra® 300W
Output Waveform
This unit’s output waveform is referred to as ”square wave“ of ”modified sine wave“. It is a stepped waveform designed to have characteristics similar to the sine wave shape of utility power. A waveform of this nature is suitable for most AC loads (including linear and switching power suppliers used in electronic equipment, transformers and motors).
+
-
fuseWARNING
A1 | A2 |