6TROUBLESHOOTING GUIDE
Problem/ | Possible | Solution |
Symptom | Causes |
|
Maintaining Your | MAINTENANCE & SERVICE 7 |
• Questions can be faxed to | |
Inverter |
| Low output voltage | Overload | Reduce the load. |
| No output voltage | Low input | Recharge battery. |
|
| voltage | Check connections |
|
|
| and cable. |
|
| Short circuit or | Check AC wiring for short |
|
| wiring error | circuit or improper polarity. |
|
|
|
|
| No output voltage | High input | Make sure the inverter |
| and ”fault“ | voltage | is connected to a |
| indicator is lit |
| 12 volt battery. |
Your CPI 300 requires very little maintenance to keep it operating properly. The exterior of the unit should be cleaned periodically with a damp cloth to prevent accumulation of dust and dirt. At the same time, tighten the screws on the DC input terminals. Keep vents and fans free from dust or debris.
24 hours, 7 days a week via
•
|
|
| Check regulation of | |
|
|
| charging system. | |
|
|
|
|
|
| No output voltage | Thermal | Allow inverter to cool down | |
| when load is in | shutdown | Improve ventilation— | |
| excess of 300 watts |
| make sure ventilation | |
| or 2.6 amperes |
| openings in the inverter | |
|
|
| aren’t obstructed. Lower | |
|
|
| ambient temperature. | |
|
|
|
|
|
| Low battery | Poor DC wiring, | Use proper cable. | |
| alarm sounds | poor battery | Ensure good connections. | |
| continuously | connection | Use new battery. |
Service
You can receive technical assistance with your unit through one of our customer support services:
•Automated Help Desk
is available 24 hours a day, 7 days a week at
7 | 8 |