Operation
Using Your Radio
Introduction | Operation | Customer Assistance Warranty |
Channel Buttons
Channel Number
Channels | • |
With the radio on, select any of the 22 channels | |
by pressing the Channel Up or Channel Down |
|
button. |
|
Both radios must be tuned to the |
|
same channel to communicate. |
|
Channels 1 through 7 are shared by FRS and |
|
GMRS. Channels 8 through 14 are FRS only. |
|
Selectable High•Low Power Output | • | |
| When in close proximity to another party or during | |
| favorable conditions, you can switch |
|
| from High to Low Power to extend battery life. |
|
Hi Power Icon | This feature applies to GMRS Channels |
|
| 1 through 7 and 15 through 22 only. |
|
| Channels 8 through 14 operate exclusively | |
| on low power. |
|
Channels 15 through 22 are GMRS only. |
See page 26 for FRS/GMRS frequency |
allocations and compatibility charts. |
Low Power Icon |
To toggle between high and low power: |
Press and release the Hi•Lo button. |
When using Channels 1 through 7 and |
15 through 22 on high power, the Hi icon |
will be visible on the display. |
Listening |
Listening for a Response | • | |
Release the Talk button to receive incoming | ||
| ||
transmissions. Your microTALK radio is always in |
| |
Standby mode while the Talk or Call buttons are |
| |
not pressed. |
| |
|
|
Light/Max Range
When using those channels on low power |
|
and on Channels 8 through 14, the Low icon |
|
will be visible on the display. |
|
To Illuminate Display | • |
|
Call Button | Call Button | • |
| To alert another person that you are calling: | |
|
|
Press and release the Call button.
The other person will hear a two second
call tone. This tone is used only to establish voice communications.
See page 24 on how to select from 10 available call tone settings.
Press and release the Light/Max Range |
button to illuminate the display for |
10 seconds. |
4 | Nothing Comes Close to a Cobra® 5 |