ActivMedia Robotics

Appendix A

H8S PORTS & CONNECTIONS

This Appendix contains pinout and electrical specifications for the external and internal ports and connectors on the H8S microcontroller, motor-power interface, and User Control boards.

Note that layered connectors are numbered differently, depending on the socket type. IDC ones are odd and even layers; mini- and micro-fit connectors use successive-position numbering. See the Figures nearby for examples.

Figure 23. Mini- and

micro-fit style connector

numbering

Figure 24. IDC-type connector b i

H8S MICROCONTROLLER

Figure 25. ActivMedia’s H8S-based microcontroller

Power Connector

The power connector is a 3-pin microfit socket that delivers 12VDC (battery) to the microcontroller circuitry and separate, conditioned 5 VDC to the sonar, including power grounds.

Table 19. H8S Controller Power Connector

PIN DESCRIPTION

112 VDC battery

2GND

3Sonar 5VDC

65

Page 71
Image 71
Pioneer 2TM, 3TM manual Appendix a, H8S Ports & Connections, H8S Microcontroller, Power Connector