Mode Functions

Operation

The Scan icon will continue to be displayed when privacy code scan is on. Your radio will continue to scan privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for 10 seconds.

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

Five Call Tone Settings

You can choose between five different Call Tone Settings to transmit a call alert.

While setting privacy code scan, if you do not press any buttons for 15 seconds your radio will automatically return to Standby mode on the channel/privacy code that was displayed before you entered mode functions.

During scanning (while receiving an incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that channel/privacy code. Your radio will remain on that

Mode/Power

Call Tone Setting

To change a call tone setting:

1.Press the Mode/Power button until the letter “C” and the current call tone number (01 through 05) is displayed. The current call tone will sound for one second.

2.Press the Channel Up or Channel Down button to hear the other call tone settings.

3.Choose one of the following:

channel/privacy code and return to Standby mode.

b. Press the Channel Up or Channel Down button to resume scanning privacy codes.

If you press the Talk button while scanning and not within

10 seconds of receiving a transmission, you will transmit on the channel/privacy code on which you last received a transmission. This will return the radio to Standby mode.

If you do not press any button within 10 seconds, your radio will automatically resume scanning privacy codes.

During scanning (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or the channel/privacy code on

 

a. Press the Mode/Power button to

Channel Button

enter the new setting and proceed

 

to other functions.

 

b. Press the Lock button to enter the new

 

setting and return to Standby mode.

Roger Beep Confirmation Tone

Your listener will hear an audible tone when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.

Mode/Power

To turn roger beep on or off:

 

 

 

1. Press the Mode/Power button until the

 

 

 

Roger Beep icon flashes. The current

 

 

 

on or off setting is displayed.

which, during scanning, you last received a transmission. This will return the radio to Standby mode.

b. Press the Mode/Power button to proceed to other functions.

c. Press the Lock button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel/privacy code on which, during scanning, you last transmitted or received.

Roger Beep Off

Channel Button

2.Press the Channel Up or Channel Down button to select roger beep on or off.

3.Choose one of the following:

a.Press the Mode/Power button to enter the new setting and return to Standby mode.

b.Press the Lock button to enter the new setting and return to Standby mode.

 

 

 

 

12

Nothing Comes Close to a Cobra® 13

Page 9
Image 9
Cobra Electronics CXT90 owner manual Five Call Tone Settings, To change a call tone setting, Roger Beep Confirmation Tone