Customer Assistance WarrantyIntroduction
15
Nothing Comes Close to a Cobra®
Operation
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
14 English
Mode Functions
Operation
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
To recall a stored memory channel location:
1.Press the Mode button until the Memory icon
and the memory location number flash on the
display.
2.Press the Channel Up or Channel Down
button to select a memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3.Press the Talk button to return to Standby
modeon the selected memory location.
Amemory location can be reprogrammed
at any time it is displayed. Press the
Lock/Enterbutton to begin.
While recalling a stored memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to Standby
mode on the channel/privacy code displayed
before you entered mode functions.
Mode Button
Memory Icon
Channel Buttons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
6.Choose one of the following:
a.Press the Channel Up or Channel Down
button to select a CTCSS privacy code
(01 through 38) for the channel.
b.Press the Lock/Enter button to
switch from CTCSS to DCS. The DCS
icon and privacy code numbers will
flash on the display. The Channel Up
or Channel Downbutton can then be
used to select a DCS privacy code
(01 through 83) for the channel.
If “OFF” flashes in place of the privacy
code numbers, a privacy code is
already set in the opposite (CTCSS
or DCS) system. Press the Channel Up
or Channel Downbutton to cancel
the opposite code and select a privacy
code from the active system for the
selected channel.
7.Choose one of the following:
a.Press the Lock/Enter button to enter
the channel/privacy code in the selected
memory location. Radio then proceeds to
next Memory location, which will blink.
b.Press the Mode button to
enter the channel/privacy code in
the selected memorylocation and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.
c.Press the Talk button to enter the
channel/privacy code in the selected
memorylocation and exit mode functions.
Upon release of the Talkbutton, the
radio will enter Standbymode on the
channel/privacy code just entered.