36 EN

EDITING

Edit To OrFrom AnotherVideoRecorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART (AV) connector to
the recorder’s 21-pin SCART (AV) connector as
illustrated on page 37.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.

SET RECORDING DECK’S

INPUT MODE

2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select depending on the
connector being used — “L-1” for the AV1 IN/OUT
connector, or “L-2” for the AV2 IN/DECODER connector.
●When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (Z pg. 37).

START SOURCE PLAYER

3
Engage its Play mode.

START RECORDING DECK

4
Engage its Record mode.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (
Z
pg. 8).
●
If you use this recorder as the player for editing, be sure to
turn off 3R Picture before starting. (
Z
pg. 14)
– –:– –
123
456
789
0
2
4
1
3
NUMBER "0"
TV PROG
OK
MENU