JVC HR-J758EH, HR-DD858EH Adjust Audio, Hi-Fi Audio Recording Level Control HR-DD858E/EH only

RETURN TO NORMAL SCREEN

– –:– –

1 2 3

2

4 5 6

7 8 9

0 4

1

OK

MENU

EN23

Hi-Fi Audio Recording Level

Control (HR-DD858E/EH only)

Your recorder allows manual adjustment of the Hi-Fi audio recording level. Normally the preset audio recording level is satisfactory, but if the sound you are going to record is too loud or too low, adjust the audio recording level while referring to the recorder's audio level meters.

	ACCESS MAIN MENU
	SCREEN
1 Press MENU.
	ACCESS HI-FI REC LEVEL
2	CONTROL SCREEN
	Press %Þ to move the highlight bar (pointer) to “REC
	LEVEL CTL”, then press OK or %.
3	SELECT MODE
	Move the highlight bar			HI-FI REC LEVEL CONTROL
	(pointer) to “MANUAL” by
	pressing	%Þ	, then press		PRESET
					MANUAL
	OK or%.
				MIN	+	MAX
				[5°] =
				[MENU] : EXIT
	ADJUST AUDIO
4	RECORDING LEVEL
	Press % or Þ.

●Press %or Þ briefly 5 times to move the on-screen's audio levels by one division on the scale. To move the audio levels faster, keep % or Þ pressed.

●Adjust the recording level while watching the recorder's audio level meters. Set the level so that maximum volume causes the meters to vary between 0dB to 4dB.

5 Press MENU.

NOTE:

Noise will increase if the recording level is too low, while distortion will increase if the level is too high.