JVC HR-DD858E SET Just Clock, SET Clock Data Source Channel Position, Start Clock Operation

– –:– –

1 2 3

2

4 5 6

7 8 9

0 4

1

OK

MENU

EN55

SET JUST CLOCK

6 The default setting is “OFF”. Set as desired by pressing %Þ, then press OK or %.

●For the Just clock function, ☞ "Just Clock" on page 54.

●If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.

SET CLOCK DATA SOURCE

CHANNEL POSITION

7 The recorder is preset to receive clock setting and adjustment data from channel position 1. Press %Þto set the channel position to the number representing the station transmitting clock setting data, then press OK or %.

START CLOCK OPERATION

8 Press MENU.

NOTES:

●Just Clock (when set to "ON") adjusts the recorder's built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when . . .

–the recorder’s power is on.

–the recorder is in the Timer mode.

–a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

–the recorder is in the Auto Satellite Prog Rec mode (☞ pg. 32).

–the recorder is in the Power Save mode (☞ pg. 9).

●If Just Clock is set to "ON", the recorder’s clock is automati- cally adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.