Manuals / Brands / TV and Video / VCR / JVC / TV and Video / VCR

JVC HR-DD858E, HR-DD858EH, HR-J758E, HR-J758EH Connecting/ Using A Decoder

1 64

Download 64 pages, 1.47 Mb

EN 43

The AV2 IN/DECODER connector can be used as an input

terminal for an external decoder (descrambler). Simply connect

a decoder and you can enjoy the variety of programming that is

available through scrambled channels.

SELECT INPUT MODE

1

Set "AV2 SELECT" to "DECODER". (Z pg. 37)

CONNECT DECODER

2

Connect your recorder's AV2 IN/DECODER connector

to the decoder's Euroconnector using a 21-pin SCART

cable.

SET TUNER

3

Perform the procedure as described in "When Receiving

A Scrambled Broadcast" on page 49.

NOTE:

When Connecting A Satellite Tuner . . .

. . . if you don't have a decoder connect the satellite tuner

directly to the video recorder's AV2 IN/DECODER connector.

. . . if you have a decoder, first connect the decoder to the

decoder input of the satellite tuner, then connect the satellite

tuner's output to the recorder's AV2 IN/DECODER connector.

Refer to the instruction book for the satellite tuner and decoder.

. . . set "AV2 SELECT" to "AV2". (

Z

pg. 37)

. . . to view a programme via the satellite tuner, select L-2 mode

by pressing NUMBER keys and/or TV PROG so that

"L-2" appears on the display panel.

Connecting/Using ADecoder

TV Receiver

TV

Aerial

Cable

RF Cable (provided)

AV1 IN/OUT

Satellite

antenna

Satellite tuner

Decoder

AV2 IN/DECODER

Contents

Main HR-DD858E/EH HR-J758E/EH VIDEO CASSETTE RECORDER EN INSTRUCTIONS SEE AUTO SET UP ON REAR SIDE Safety Precautions CAUTION WARNING For Italy: Connections SITUATE RECORDER CONNECT RECORDER TO TV To Connect To A TV With NO AV Input Terminals . . . To Connect To A TV With AV Input Terminals . . . Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Program Number Set/Auto Video Channel Set TURN ON THE RECORDER SELECT COUNTRY If you are referring to the front display panel CONFIRM/SET VIDEO CHANNEL FINISH AUTO SET UP SELECT LANGUAGE If you are referring to the front display panel If you are referring to the on-screen display INITIAL SETTINGS (cont.) Auto Set Up results appear on the front display panel INFORMATION Language ACCESS COUNTRY SET SELECT COUNTRY SELECT LANGUAGE On-Screen Displays INITIAL SETTINGS (cont.) The superimposed indication on the TV screen tells you what the recorder is doing. ENABLE/DISABLE ON-SCREEN DISPLAY q6 Power Save Mode (HR-J758E and HR-DD858E only) The Just Clock function ( SELECT POWER SAVE During Power Save, the display panel will be turned off. Colour System Set INFORMATION ON COLOUR SYSTEM SELECT COLOUR SYSTEM About NTSC Playback The counter and tape remaining time readings will be incorrect. Playback Usable cassettes LOAD A CASSETTE FIND PROGRAMME START POINT STOP PLAYBACK Playback Features High-Speed (Turbo) Search ACTIVATE HIGH-SPEED Still Picture/Frame-By- Frame Playback PAUSE DURING PLAYBACK ACTIVATE SLOW-MOTION Refer to the SHUTTLE ring illustration to the right as you read the following procedures. Still Picture/Frame-By-Frame Playback (For HR-J758E/EH) PAUSE DURING PLAYBACK ACTIVATE FRAME-BY-FRAME OVERRIDE AUTOMATIC TRACKING ADJUST TRACKING MANUALLY RETURN TO AUTOMATIC TRACKING When a new tape is inserted, the recorder enters the automatic tracking mode automatically. Variable-Speed Search ACTIVATE INDEX SEARCH SKIP OVER UNWANTED SECTIONS To return to normal playback during a Skip Search, press PLAY. For HR-DD858E/EH Owners: It will be 9x normal playback speed with TimeScan ACTIVA TE SPA TIALIZER Repeat Playback ACTIVATE REPEAT PLAYBACK STOP PLAYBACK Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback. TimeScan (HR-DD858E/EH only) "TIME SCAN AUDIO" must be set to "ON", or the sound will not be heard in TimeScan mode. ( pg. 19) The audio will not synchronize with the video in TimeScan modes. TimeScan If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below). 4 TimeScan Audio 1 2 LOAD A CASSETTE CHOOSE A PROGRAMME PAUSE/RESUME RECORDING STOP RECORDING Accidental erasure prevention Features Record One Programme While Watching Another If your recorder is connected to the TV via AV connection, . . . SELECT CHANNEL TO WATCH Elapsed Recording Time Indication RECORDING (cont.) "O.S.D." must be set to "ON" or the on-screen displays will not appear ( pg. 8). To Record NICAM Stereo And Bilingual Programmes (HR- J758EH or HR-DD858EH only) pg. 16). ACCESS HI-FI REC LEVEL CONTROL SCREEN SELECT MODE ADJUST AUDIO RECORDING LEVEL B.E.S.T. Picture System Preparation RECORDING (cont.) SELECT B.E.S.T. MODE Recording Playback ACCESS SHOWVIEW SCREEN ENTER SHOWVIEW NUMBER ACCESS SHOWVIEW PROGRAM SCREEN SHOWVIEW Timer Programming TIMER RECORDING SHOWVIEW SHOWVIEW 12345678 SET TAPE SPEED Timer Warning Express Timer Programming ACCESS SHOWVIEW ACCESS PROGRAMME ENTER PROGRAMME START TIME ENTER PROGRAMME STOP TIME ENTER CHANNEL POSITION SET VPS/PDC MODE Z ENGAGE RECORDERS TIMER MODE Satellite Tuner Users Check, Cancel And Replace Programmes DISENGAGE TIMER MODE ACCESS PROGRAM CHECK SCREEN/DISPLAY ACCESS PROGRAM SCREEN/ DISPLAY To cancel or replace a programme... Auto Timer ACCESS MAIN MENU SCREEN ACCESS MODE SET SCREEN SELECT MODE RETURN TO NORMAL SCREEN Automatic Satellite Programme SELECT AV2 SELECT MODE ENGAGE AUTO SATELLITE PROG REC MODE Remote A/B Code Switching REMOVE POWER SUPPLY Remote Control Functions SPECIAL FEATURES (cont.) Control Your TV Using Additional Buttons SET TV BRAND CODE OPERATE TV TV Multi-brand Remote Control Satellite Tuner Multi-Brand Remote Control SET SATELLITE RECEIVER BRAND CODE OPERATE SATELLITE TUNER EDITING Edit To Or From Another Video Recorder When Using Your Video Recorder As The Source Player . . . When Using Your Video Recorder As The Recording Deck . . . SET RECORDING DECKS INPUT MODE START SOURCE PLAYER AV2 SELECT Setting 1 2 3 4 5 On the Mode Set screen ... "POWER SAVE" appears only with the HR-J758E and HR-DD858E. Edit From A Camcorder SET RECORDERS INPUT START CAMCORDER START RECORDER EDITING (cont.) Audio Dubbing (HR-DD858E/EH only) SET INPUT MODE LOCATE START POINT ENGAGE AUDIO DUBBING Insert Editing (HR-DD858E/EH only) EDITING (cont.) SET INPUT MODE LOCATE END POINT ENGAGE INSERT EDITING START EDITING END INSERT EDITING FOR AV INSERT EDITING Connection To A Satellite Tuner SYSTEM CONNECTIONS For details, check your satellite tuners instruction manual. SELECT INPUT MODE CONNECT DECODER Connecting/ Using A Decoder Connecting/ Using A Stereo System SYSTEM CONNECTIONS (cont.) When listening to sound through the connected stereo system, turn the TVs volume down completely. CAUTIONS: ACCESS VIDEO CHANNEL SET MODE Video Channel Set Tuner Set ACCESS COUNTRY SET SELECT COUNTRY SELECT LANGUAGE Auto Channel Set PERFORM AUTO CHANNEL SET VIEW CONFIRMATION Storing Channels Manually SELECT BAND (Ex.) To store in position 12. INPUT CHANNEL ENTER NEW CHANNEL INFORMATION ACCESS CONFIRMATION Change Station Channel Position SELECT ITEM SELECT NEW POSITION SELECT ITEM DELETE CHANNEL SELECT STATION NAME CHARACTER ENTER NEW CHARACTER * Set Stations (B) SELECT ITEM TV Station And ID List SELECT CHANNEL TO FINE-TUNE ACCESS MANUAL CHANNEL SET SCREEN PERFORM TUNING Fine-Tuning Channels Already Stored SHOWVIEW Setup When timer-programming with S When you wish to timer-record a satellite programme with S . Guide Program Number Set Clock Set SET JUST CLOCK SET CLOCK DATA SOURCE CHANNEL POSITION START CLOCK OPERATION TROUBLESHOOTING POWER TAPE TRANSPORT RECORDING PLAYBACK TIMER RECORDING OTHER PROBLEMS QUESTIONS AND ANSWERS PLAYBACK RECORDING TIMER RECORDING EN 59 INDEX # $*&^%9 !0 FRONT VIEW 1 2 3 INDEX (cont.) 2 4 VCR REVIEW 09 #$8 REMOTE CONTROL u 0 W i o SPECIFICATIONS Page HR-DD858/J758E/EH * Auto Set Up pg. 45) as required. pg. 46), clock setting ( BEFORE YOU START PLEASE MAKE SURE THAT: n n n n