JVC HR-J758EH, HR-DD858EH specifications Recording Features

EN21

Recording Features

RECORD

– –:– – – –:– –

TV/VCR

Record One Programme While Watching Another

If your recorder is connected to the TV via AV connection, . . .

. . . press TV/VCR. The recorder's VCR indicator and the TV broadcast being recorded disappear.

SELECT CHANNEL TO

WATCH

1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape.

●If a decoder is connected to the recorder (☞ pg. 43), you can select a scrambled channel as well with the TV channel controls.

1 2 3

4 5 6

7 8 9

2

Elapsed Recording Time Indication

0000

0

4

TV PROG

You can check the exact time of a recording.

SET COUNTER DISPLAY

1 Press – –:– – until a counter reading appears on the dispay panel.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

START RECORDING

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. "" blinks and 0:30 appears on the front display panel.

SET RECORDING DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.

●The HR-J758E/EH owners can use the DISPLAY button on the recorder's front panel as well.

2		RESET COUNTER
	Press 0000 before starting recording or playback.
		● The counter is reset to “0:00:00” and shows the exact
		elapsed time as the tape runs.

Tape Remaining Time

DISPLAY REMAINING TIME

1 Press – –:– – until the time remaining on the tape appears.

●The display panel shows the tape remaining time with "" displayed.

●By pressing the – –:– – button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.

*channel position is not displayed during playback.

●The HR-J758E/EH owners can use the DISPLAY button on the recorder's front panel as well.

NOTE:

Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "– –:– –" may sometimes appear, or the display may blink on occasion.