Cobra Electronics MR HH400 EU owner manual Advanced Operation, Channel, Tri-Watch

400-BR-F 6/23/04 2:12 PM Page 36

Advanced Operation

Advanced Operation

Operating Your Radio

Advanced Operation

Channel 16

•

Operating Your Radio

Tri-Watch

Tri-Watchgives you one button access to scan the three locations of most importance to you. Channel 16 will always be one of the scanned

This function gives you quick access to the calling Channel 16 from any operational mode.

locations. The other two locations will be stored in the radio. They can be edited and/or recalled for future engagements of Tri-Watchmode.

Channel 16 Button

To switch to Channel 16:

1.Press the Channel 16 button to change to Channel 16.

To exit the Channel 16 mode and return to whatever status existed before entering this mode, press the Channel 16 button a again.

NOTE

The radio must be squelched for tri-watch to function. See page 31 for squelch procedure.

Channel 16

While in the Channel 16 mode, you can also press the Channel Up and Channel Down buttons to change channels.

If you press this button when Key Lock mode is On, you will get a three-beep error message and your radio will not change mode.

Tri-Watch Button

Tri-Watch and Memory Icons

Channel Up/Down Buttons

To program or edit the tri-watch locations:

1.Press and hold the Tri-Watchbutton. The Tri-Watchand Memory icons on the LCD will be turned On.

2.Press the Channel Up or Channel Down button to move to the channel you want to enter into tri-watch location one.

3.Press the Tri-Watchbutton. You will hear a two-beep confirmation signal.

4.Press the Channel Up or Channel Down button to move to the channel you want to enter into tri-watch location two.

5.Press the Tri-Watchbutton. You will hear a two-beep confirmation signal and the Memory icon will disappear from the LCD. The radio will immediately engage tri-watch (see page 38 for further details).

36 English Nothing comes close to a Cobra® 37