Operating Your Radio
Call Tone Select
Setup Mode Programming
Call Tone Select continued
To Set Call Tone:
1.From the previous press of the Call/Enter/Setup button, the LCD will display the letter “C” and the current Call Tone number (01 through 10).
2.Press the Channel Up/Down button to select a different Call Tone. An example of each call tone will sound for 1.5 seconds.
3.Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.
NOTE: Call Tones are not usually used for Marine VHF communications. We allow you to turn it On for
Bluetooth® Mode Pairing
and Programming
Operating Your Radio
Bluetooth® Mode Pairing and Programming
Bluetooth® wireless technology is a standard which has been developed for use
in mobile phones and other devices. This radio can be wirelessly linked to your mobile phone if your mobile phone also has Bluetooth. This process of linking your mobile phone and this radio is called “Pairing.” Once paired, this radio can act as
the speaker and microphone of your mobile phone while your phone is stowed in a safe and dry location.
This programming section shows you how to complete the pairing process. It also shows you how to change some settings related to the Bluetooth functionality of your radio.
Roger Beep Mode
Key Tone Mode
your unique communication needs.
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone when you release the Talk button. This alerts your listener that you are finished talking and it is OK for them to speak.
To Set Roger Beep On or Off:
1.Display will show ROG icon and ON or OFF flashing.
2.Press Channel Up/Down button to select ON or OFF. ROG will be displayed when On.
3.Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a button is pressed or you change a setting.
To Set Key Tone On or Off:
1.Display will show Key Tone icon and ON or OFF flashing.
2.Press Channel Up/Down button to select ON or OFF.
3.Press Call/Enter/Setup button to save entry.
ATIS Mode
Bluetooth Standby Mode, Unpaired State
Bluetooth Standby Mode, Paired State
Pairing Your Mobile Phone:
1.Press and release the Bluetooth button to enter Bluetooth Standby. The LCD will change from VHF Standby mode display to Bluetooth Standby mode display. The word “bLUE” will be shown on the display and the blue keypad backlight will come On.
2.Press and hold the Bluetooth button on the HH475BT for four
(4) seconds [until the radio beeps four (4) times] from the Bluetooth Standby mode. The blue backlight will flash for some time. Your radio is now in a “Pairing Mode” and can be “found” by your phone.
While in pairing mode, the LCD will display the sequence as shown in the illustration below.
3.Follow the mobile phone’s instructions to search for available pairing with another Bluetooth device. This can often be found in the Tools or Settings menu of your mobile phone.
Enter the “P.I.N.” (Personal Identification Number 0000), on your mobile phone when prompted. Wait for the pairing process to complete.
ATIS Mode
20 English
ATIS mode allows control over ATIS packet transmissions. This mode is only visable after initial ATIS
To Set ATIS On or Off:
1.Display will show ATIS icon and ON or OFF flashing.
2.Press Channel Up/Down button to select ON or OFF.
3.Press Call/Enter/Setup button to save entry.
You have now ended Marine (VHF) Setup mode programming and will enter Marine Standby mode.
NOTE: Scan and
Bluetooth Pairing Mode
Sequence
Nothing Comes Close to a Cobra® 21
