Operating Your Radio
Bluetooth Radio On
Bluetooth Radio Off
Bluetooth® Mode Pairing and Programming
Bluetooth Radio On/Off
This setting allows you to turn On and Off the small Bluetooth radio inside this VHF radio. The default setting
is ON. Turning it Off can save some power. It can easily be switched On at any time.
To Set Bluetooth On and Off:
1.Display will show the word blue and ON or OFF flashing.
2.Press Channel UP/Down button to select ON or OFF.
3.Press the Call/Enter/Setup button to save this entry.
ATIS ID Programming
Operating Your Radio
ATIS ID Programming
•
The Automatic Transmission Identification System (ATIS) feature of this Cobra radio is used to identify marine vessels in some inland waterways of European countries that require ATIS transmission. An ATIS ID number is required to operate the ATIS feature. The ATIS ID number is derived from your vessels call sign. You must enter your ATIS ID number into this radio before the ATIS system will become functional.
Please consult your local dealer for questions about local ATIS requirements. The use of ATIS is prohibited outside the European inland waterways covered by the Basel Agreement.
With this feature activated the vessels ATIS ID number is transmitted after every push of the Talk button.
24 English
You have now ended Bluetooth Setup mode programming and will enter ATIS ID programming.
Channel Down
and SCAN Buttons
ATIS ID Start Screen
Channel Up/Down Button 
ATIS ID Number Entry
To Set the ATIS ID Number:
NOTE
The ATIS ID is a 10 digit number that will always begin with the number “9.” You will be asked to enter only the last nine digits. The first digit, “9”, has been automatically entered for you.
1.With the radio turned Off; press and hold the Channel Down and SCAN buttons and simultaneously power On the radio.
2.The LCD will display and flash the ATIS icon.
A dash
NOTICE
Remember, you only have one (1) attempt to set the ATIS ID number. Once this number has been entered, only your Cobra distributor can reset the ATIS ID number. You can also return the radio to Cobra for reprogramming.
3.Press the Channel Up/Down button to scroll through the specific ATIS digit being entered.
4.Pressing the Call/Enter/Setup button advances to the right, one (1) digit, for the next entry.
5.Repeat this input sequence until all nine digits have been entered. The ATIS icon will stop flashing when a successful ATIS ID entry has been made.
6.Press the Call/Enter/Setup button again, after all numbers have been entered, to save the ATIS ID number and return to the Marine Standby mode.
Nothing Comes Close to a Cobra® 25
