Introduction | Operation | Customer Assistance Warranty |
Mode/Power
Battery Low
•
Press and hold the Mode/Power button until you hear a series of audible tones indicating the radio is on.
Your microTALK® radio is now in Standby mode, ready to receive transmissions. The radio is always in Standby mode except when the Talk, Call or Mode/Power buttons are pressed.
•
When battery power is low, the Battery Low icon will blink. Your batteries should be replaced or recharged, if using rechargeable batteries.
| Auto Battery Save |
| ||
Battery Save Mode |
| • | ||
| ||||
|
| If there are no transmissions within 10 seconds, | ||
|
| the radio will automatically switch to Battery |
| |
|
| Save mode and the Power Saver icon will flash |
| |
|
| in the display. This will not affect the radio’s |
| |
|
|
| ||
|
| ability to receive incoming transmissions. |
| |
Talk Button
Two Inches (5 cm) from Mouth
Communicating with Another Person
1.Press and hold the Talk button.
2.With the microphone about two inches (5 cm) from your mouth, speak in a normal voice.
3.Release the Talk button when you are finished talking and listen for a response.
You cannot receive incoming calls while pressing the Talk button.
Both radios must be tuned to the same channel to communicate.
•
3
