Introduction | Operation | Customer Assistance Warranty |
Mode/Power
To Set VOX Sensitivity:
1.Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is displayed.
VOX Sensitivity Level | The current VOX sensitivity level is | |
| ||
| displayed with letters “LE” and a Number | |
| 1 through 5, with Number 5 being the | |
| most sensitive level and Number 1 | |
| being the least sensitive level. | |
Channel Button | ||
| ||
| 2. Press the Channel Up or Channel Down | |
| button to change the setting. | |
| 3. Choose one (1) of the following: | |
| ||
| a. Press the Mode/Power button to enter | |
| the selected setting and proceed to other | |
| functions. | |
| b. Press the Lock button to enter the selected | |
| setting and return to Standby mode. |
Channel Scan
•
Your microTALK® radio can automatically scan channels.
Mode/Power
To scan channels:
1.Press the Mode/Power button until the Scan icon and the channel numbers appear on the display.
Scan Channels
Channel Button
2.Press the Channel Up or Channel Down button to begin scanning channels.
The radio ignores specific privacy codes while scanning channels.
The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.
While setting channel scan, if you do not press any buttons for 15 seconds your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.
9
