Euro-Pro GI475 Burst of Steam, BUILT-IN ANTI-CALCIUM Filter, Self-Cleaning, Storage, Pivot Cord

FEATURES OF STEAM IRON WITH HEADLIGHT

OPERATING INSTRUCTIONS (CONT.)

1.BURST OF STEAM

The Burst of Steam provides extra, sudden blasts of steam which aid in removing stubborn wrinkles from fabrics such as denim, cotton or linen.

7.BUILT-IN ANTI-CALCIUM FILTER

Prevents calcium build-up and prolongs the life of the iron.

SELF-CLEANING

In order to remove calcium and built-up particles, the self-cleaning system should be run at least once a month.

•	Fill the water beaker provided halfway
	and then pour into the water reservoir.
•	Set the variable steam control to the no

STORAGE

1.	Always turn the variable steam
	control to “0” after you have
	emptied the water tank.
2.	Allow the iron to cool down.
3.	Always store the iron in the upright
	position to protect the soleplate.

2.ATOMIZER SPRAY BUTTON

Pressing this Button provides a defined jet of spray which gently moistens fabric.

3.VARIABLE STEAM CONTROL

Minimum to maximum steaming for different materials. Self cleaning feature flushes internal sole plate with water.

8.STAINLESS STEEL SOLEPLATE

Provides maximum glide- ability and heat retention.

9.PIVOT CORD

For left or right handed use. Pivots up and down; prevents dragging along the fabric. The flexible cord protector protects the cord from fraying.

steam position.

• Insert the main plug into the wall socket.

• Set the temperature control dial to the

maximum temperature.

• Wait until the thermostat light goes off and

steam iron has reached preset

temperature.

• Remove the plug from the wall socket.

• Hold the steam iron horizontally over a

sink.

• Turn the variable steam control to

“Self-Clean ” position. Hot water and steam will be emitted from the soleplate. Swing the steam iron lightly back and forth

4.	From time to time, clean the exterior
	of the iron with a damp cloth and
	wipe dry.
5.	If you use spray starch, wipe the
	soleplate occasionally with a soft
	damp cloth to prevent the build-up of
	deposits.
6.	If the iron has not been used for a
	few weeks, hold the iron horizontally
	and allow to steam for 2 minutes
	before ironing.

WARNING: The anti-drip function reduces water dripping and water stains. It

4.TEMPERATURE CONTROL

Turn dial to select temperature. Main temperature settings are indicated by the 1, 2 and 3 dots. (See “Ironing Chart.”)

5.ANTI-DRIP FUNCTION

Built-in Anti-Drip feature helps reduce water spots by cutting of water flow when the iron temperature is too low to build sufficient steam.

6.WATER FILLING INLET

The cover prevents dust and foreign matter from entering the water tank. It also stops any water from spilling during ironing.

10.SELF-CLEANING

Flushes internal soleplate with water.

11.HEADLIGHT

Shadow free ironing.

gently to allow lime and dust particles to come out.

•When the water reservoir is empty, shift the variable steam control from “Self- Clean” position to “0”.

•Stand the iron upright and insert the plug into the wall socket to let the iron heat up again.

•Move the iron over a clean cotton cloth to clean the soleplate and let the remaining water on the soleplate evaporate.

ANTI-DRIP FEATURE

Built-in Anti-Drip feature helps reduce water spots by cutting of water flow when the iron temperature is too low to build sufficient steam. The anti drip function reduces water dripping and water stains. It does not prevent water dripping and water stains if you press the steam burst button too often or if the temperature is too low. The amount of water droplets will eventually decrease after the iron is used for 2 to 3 tankfuls of steaming and ironing.

does not prevent water dripping or water stains if you press the steam burst button too often or if temperature is too low. The amount of water droplets will eventually decrease after iron is used for 2 to 3 tankfuls of steaming and ironing.

3

8