Zanussi ZI 5280 D manual Maintenance, Servicing, Periodic cleaning, Periods of non-operation

MAINTENANCE

Unplug the appliance before carrying out any maintenance operation.

Periodic cleaning

Never use metal objects for cleaning your appliance as it may get damaged.

Clean the inside with warm water and bicarbonate of soda.

Rinse and dry thoroughly.

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

remove the plug from the wall socket;

remove all food;

defrost and clean the interior and all accessories;

leave the door ajar to allow air to circulate to prevent unpleasant smells.

Interior light

The light bulb inside the refrigerator compartment can be reached as follows:

“unscrew the light cover securing screws;

“unhook the moving part by pressing it as shown in the figure.

If the door is open and the light does not come on, check that the bulb is properly screwed in; if it still does not work, replace the bulb with one of the same power.

The maximum rating is shown on the light cover.

Fig. 16

D411

SERVICING

If the appliance is not functioning properly check that:

the plug is firmly in the wall socket and the mains power switch is on;

there is no power failure; the control knob is in the right position.

If there is water on the fridge bottom, make sure the defrost water drain hole is not clogged (Fig. 14).

To do this, use the cleaner provided which can be found in the drain hole.

If your appliance is still not working properly after making the above checks, contact your local dealer or the nearest service center.

To obtain fast service, it is essential that when you apply for it you specify the model and serial number of your appliance which can be found on the warranty certificate or inside the appliance on the rating plate.

19