For appropriate venting, follow indications in Fig. 2.
Fig. 2 | |
| min. |
| cm2 200 |
D033 |
|
Push appliance into housing until stop strip (A) touches the kitchen unit.
Fig. 3
A
D015
If after having carried out the operation described in the previous section there is still some space left between the appliance and the kitchen unit, fit the trimming provided together with the appliance on the stop strip (A).
Fig. 4
A
D265
Open the door and push the appliance against the side of kitchen furniture opposite to that of appliance hinges.
Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap vent grill (C) and hinge cover (D) into position.
| Fig. 5 |
| D |
D502 | C |
Press in the joint covers between the appliance and the kitchen furniture.
Fig. 6
D503
Apply covers (B) on joint cover lugs and into hinge holes.
Fig. 7
B
D353
14
