La Crosse Technology WS-1510-IT LA Crosse Technology Sensor Extension Cable, Liability Disclaimer

Models: WS-1510-IT

1 13
Download 13 pages 1.63 Kb
Page 9
Image 9

First, check that the wind-cups and the wind-vane can rotate freely before fixing the unit. For correct and accurate readings, it is important to mount the sensor so that the front (marked E) is pointing in East- West direction. The wind sensor should now be mounted using the screw or cable tie provided onto a solid wall/ panel mast or mast to allow the wind to travel around the sensor unhindered from all directions (ideal mast size should be from diameter 0.62” to 1.29” (16mm to 33mm). Do not over tighten.

Once the wind sensor is fixed onto the mast, connect the cable to the corresponding thermo-hygro sensor socket so that operating power supply can be received and data can be transmitted to the base station. Secure cord from blowing. Do not use staples. Using PVC pipe or metal as a mast may cause static. Wood is recommended.

The Rain Sensor

For best results, the rain sensorHorizshouldntal bepanelsecurely mounted onto a horizontal surface about 39.37” (1 meter) above the ground (or higher) and in an open area away from trees or other coverings where rainfall may be reduced causing inaccurate readings.

When securing into place, check that rain excess will not collect and store at the base of the unit but can flow out between the base and the mounting surface (test by pouring clean water).

After mounting the rain sensor and placing battery, the rain sensor is now operable. For testing purposes, very slowly pour a small amount of clean water into the rain sensor funnel. The water will act as rainfall and will be received and displayed at the base station i.e. when the reading interval is reached.

Note:

You will need to be able to access your rain gauge periodically to clean debris and possible insect nests. Please keep this in mind when mounting.

LA CROSSE TECHNOLOGY SENSOR EXTENSION CABLE

33

Indoor

:

32°F to +140°F with 0.2°F resolution

 

 

0ºC to +59.9ºC with 0.1ºC resolution

 

 

(“OF.L” displayed if outside this range)

Outdoor / dew point :

-40°F to +140°F with 0.2°F resolution

 

 

 

-40ºC to +59.9ºC with 0.1ºC resolution

 

 

 

(“OF.L” displayed if outside this range)

Relative humidity measuring range:

 

Outdoor

:

1% to 99% with 1% resolution

 

 

(“- -” displayed if < 1%, "99" displayed if 99%)

Wind speed/ gust

 

:

0 to 111.8 mph (0 to 50 m/s)

 

 

 

(displayed "OF.L" when > 111.8 mph; 50m/s)

Wind chill/ dew point:

-40°F to +140°F (-40ºC to +59.9ºC)

 

 

 

(displayed "OF.L" if outside this)

Relative pressure pre-set range

:

27.17 to 31.90 inHg (919 to

 

 

 

 

 

1080 hPa)

24h rainfall

 

 

:

0" to 39.36" (0 to 999.9 mm)

 

 

 

 

(displayed "OF.L" when > 999.9mm)

Total rainfall

 

 

:

0" to 393.6" (0 to 9999 mm)

 

 

 

 

(displayed "OF.L" when > 9999mm)

Outdoor data reception

:

every 4.5 seconds (from thermo-hygro

 

 

 

 

transmitter)

 

 

 

 

every 6.25 seconds (from rain sensor)

Air pressure checking interval:every 15 seconds

Transmission range

:

up to 330 feet (100 meters) in open

space

 

 

 

 

 

Power consumption:

 

 

 

Weather Center

 

 

:

3 x AA, IEC LR6, 1.5V

Thermo-hygro transmitter :

2 x AA, IEC LR6, 1.5V

Rain sensor

 

 

:

2 x AAA, IEC LR3, 1.5V

Battery life

 

 

:

approximately 24 months (Alkaline

Dimensions (L x W x H):

 

batteries recommended)

 

 

 

Weather Center

 

 

:

4.59” x 0.94” x 7.01”

 

 

 

 

(116.8 x 24 x 178.1mm)

Thermo-hygro transmitter :

2.25” x 2.44” x 6.18”

 

 

 

 

(57.3 x 62 x 157mm)

Wind sensor

 

 

:

9.84” x 5.74” x1087”

 

 

 

 

(250 x 145.9 x 276.2mm)

Rain sensor

 

 

:

5.67” x 2.15” x3.46”

 

 

 

 

(144 x 54.6 x 88mm)

LIABILITY DISCLAIMER

The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country and/or in unauthorized grounds strongly damages the environment.

Please contact your local or/and regional authorities to retrieve the addresses of legal dumping grounds with selective collection.

35

When you require additional length to properly mount your sensor, you can use a La Crosse Technology extension cable. The extension cable is 32 feet in length and comes with the appropriate connecter attached, Please visit your local retailer or www.greatbigoutlet.com to purchase.

Phone cable and connections have much more resistance than our extension cable and is not recommended for use. Using phone cable/connection may damage your sensors.

Note:

Using extension cables will shorten battery life.

Warning:

Never cut, splice, shorten or modify your sensor cables or extension cables. Doing so may damage your sensors and will Void you Warranty.

CARE AND MAINTENANCE:

Extreme temperatures, vibration and shock should be avoided as these may cause damage to the unit and give inaccurate forecasts and readings.

Precautions shall be taken when handling the batteries. Injuries, burns, or property damage may be resulted if the batteries are in contact with conducting materials, heat, corrosive materials or explosives. The batteries shall be taken out from the unit before the product is to be stored for a long period of time.

Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type.

When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casings.

Do not submerge the unit in water.

Special care shall be taken when handling a damaged LCD display. The liquid crystals can be harmful to user's health.

Do not make any repair attempts to the unit. Return them to their original point of purchase for repair by a qualified engineer. Opening and tampering with the unit may invalidate their guarantee.

Never touch the exposed electronic circuit of the device as there is a danger of electric shock should it become exposed.

Do not expose the units to extreme and sudden temperature changes, this may lead to rapid changes in forecasts and readings and thereby reduce their accuracy.

SPECIFICATIONS:

Temperature measuring range:

34

All electronic instruments must from now on be recycled. User shall take an active part in the reuse, recycling and recovery of the electrical and electronic waste.

The unrestricted disposal of electronic waste may do harm on public health and the quality of environment.

As stated on the gift box and labeled on the product, reading the “User manual” is highly recommended for the benefit of the user. This product should not be thrown in general rubbish collection points.

The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place.

This product is designed for use in the home only as indication of the temperature.

This product is not to be used for medical purposes or for public information.

The specifications of this product may change without prior notice.

This product is not a toy. Keep out of the reach of children.

No part of this manual may be reproduced without written authorization of the manufacturer.

WARRANTY INFORMATION

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.

This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.

La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La

36

Page 9
Image 9
La Crosse Technology WS-1510-IT LA Crosse Technology Sensor Extension Cable, Liability Disclaimer, Care and Maintenance