La Crosse Technology WS-1510-IT Temperature Unit Setting, Wind Speed Unit Setting

4.Use the + or MIN/MAX key to set the month.

5.Press the SET key to confirm the month and enter the date setting mode. The date digit will start flashing.

6.Use the + or MIN/MAX key to set the date.

7.Confirm all calendar settings with the SET key and enter the °F/°C

TEMPERATURE UNIT SETTING.

°F/°C TEMPERATURE UNIT SETTING

Flashing

The temperature display can be selected to show temperature data in °F or °C. (default °F)

1.The temperature unit is flashing

2.Use the + or MIN/MAX key to toggle between “°F” or “°C”.

3.Confirm with the SET key and enter the WIND SPEED UNIT

SETTING.

WIND SPEED UNIT SETTING

Flashing

The wind speed unit can be set as mph (mile per hour), km/h (kilometer per hour), or m/s (meter per second). The default unit is mph.

1.Use the + or MIN/MAX key to toggle between the unit “mph”, “km/h” or “m/s”

2.Confirm with the SET key and enter the RAINFALL UNIT SETTING.

RAINFALL UNIT SETTING

Flashing

The rainfall unit can be set as inch or mm. The default unit is inch.

1.Use the + or MIN/MAX key to toggle between the unit “inch” or “mm”

2.Confirm the unit with the SET key and enter the RELATIVE AIR

PRESSURE UNIT SETTING

RELATIVE AIR PRESSURE UNIT SETTING

Flashing

13

1.The sensitivity value will start flashing

2.Use the + or MIN/MAX key to select the value.

3.Confirm with the SET key and enter the STORM WARNING SENSITIVITY SETTING.

STORM WARNING THRESHOLD VALUE SETTING

You may also define a switching sensitivity value for the Storm warning display at a decrease of air pressure from .09 inHg to .27 inHg over 6 hours (Default 0.15 inHg).

Flashing

Flashing

1.The sensitivity value will start flashing.

2.Use the + or MIN/MAX key to select the value.

3.Confirm with the SET key and enter the STORM ALARM ON/OFF SETTING.

STORM ALARM ON/ OFF SETTING

You may also choose to switch On or Off the acoustic Storm warning alarm (Default OFF).

1.The digit "AOF" will start flashing.

2.Use the + key to switch On or Off the alarm. ("AOF" = OFF; "AON" = On)

3.Confirm with the SET key and the normal display mode will be shown.

Flashing

Note:

In case a storm warning alarm is activated, the downward weather tendency arrow will be flashing. (Also see WEATHER TENDENCY INDICATOR below)

TO EXIT THE MANUAL SETTING MODE

To exit the manual setting anytime during the manual setting modes, press the ALARM key (or HISTORY key) or wait for the automatic timeout. The mode will return to the normal time display.

TIME ALARM SETTING

The alarm time can be set by the use of the ALARM and SET key.

1.Press the ALARM key once. The “ALARM” icon and time digits are shown at the top right of the LCD.

15

The relative air pressure can be set as inHg or hPa. The default unit is inHg.

1.Use the + or MIN/MAX key to toggle between the unit “inHg" or “hPa”

2.Confirm the unit with the SET key and enter the RELATIVE PRESSURE REFERENCE VALUE SETTING.

RELATIVE PRESSURE REFERENCE VALUE SETTING

Note:

The default reference pressure-value of the barometer is 29.91inHg when batteries are first inserted. For an exact measurement, it is necessary to first adjust the barometer to your local relative air pressure (related to elevation above sea level). Ask for the current atmospheric pressure of your home area (Local weather service, www, optician, calibrated instruments in public buildings, airport).

The relative air pressure can be manually set to another value within the range of 27.17 to 31.90 inHg (919 to 1080 hPa) for a better reference.

Flashing

1.The current relative pressure value will start flashing

2.Use the + or MIN/MAX key to increase or decrease the value. Continually holding the key will allow the value to increase faster.

3.Confirm with the SET key and enter the WEATHER TENDENCY SENSITIVITY VALUE SETTING.

Note:

This feature is useful for those who live at elevations above sea level, but want their air pressure display to be based on sea level elevation.

WEATHER TENDENCY SENSITIVITY LEVEL SETTING

Flashing

Flashing

You may select a definite switching sensitivity value, .06, .09, or .12 inHg for the change in the display of weather icons. This represents the "sensitivity" of the weather forecast (the smaller the value selected, the more sensitive the weather forecast). The default value is 0.09 inHg. Select lower numbers for high humidity areas, i.e. Oceanside. Select high numbers for arid areas, i.e. desert.

14

Alarm time digit

Alarm-On icon

2.Press and hold the SET key for about 2 seconds. The hour digit of the alarm time will start flashing. Press the + or MIN/MAX key to set the hour of the alarm time.

3.Press the SET key to confirm and advance to the minute setting. The minute digit will be flashing.

4.Press the + or MIN/MAX key to set the minute of the alarm time. Press the ALARM key to confirm. Wait for about 30 seconds and the display will return to normal display mode automatically.

5.In the normal display mode, press the ALARM once key to go to the time alarm-setting mode again. Then press shortly the SET key to switch on or off the time alarm. (The showing of the icon

(((y))) means that the time alarm is switched on.)

6.Press the HISTORY key or wait for about 30 seconds and the display will return to normal display mode automatically.

Note:

The alarm ringing duration is 2 minutes. To stop the alarm, press any key during the alarm ringing.

WEATHER ALARM OPERATIONS

The Weather alarms can be set when certain weather conditions are met according to your requirements. For example, you can set the thresholds for the outdoor temperature to +104°F (high) and 14°F (low), while only enabling the high alarm and disabling the low alarm (i.e. temperatures <14°F won’t trigger alarm, but temperatures >+104°F will).

	High wind speed
Outdoor temp	Alarm-On icon
Alarm-On icon	Outdoor humidity
	Alarm-On icon

16