Mode Functions
Operation
10 Memory Locations
•
Your microTALK® radio has 10 Memory Locations for storing your most frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned. (See page 20 for memory location scan.)
Lock/Mode Button To program a memory location:
1.Press the Lock/Mode button until the Memory icon and the memory location flash on the display.
|
|
|
|
|
|
| Introduction | Operation | Customer Assistance | Warranty |
|
6. Choose one of the following: |
a. Press the Channel Up or Channel Down |
button to select a CTCSS privacy code |
(01 through 38) for the channel. |
b. Press the Hi•Low/Enter button to |
switch from CTCSS to DCS. The DCS |
icon and privacy code numbers will |
flash on the display. The Channel Up |
or Channel Down button can then be |
used to select a DCS privacy code |
Memory Icon
Channel Buttons
Hi•Low/Enter Button
2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
3.Press the Hi•Low/Enter button to enter a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.
4.Press the Channel Up or Channel Down button to select a channel (1 through 22).
5.Press the Hi•Low/Enter button. The CTCSS icon and privacy code numbers will flash on the display.
(01 through 83) for the channel. |
If “OF” flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS
or DCS) system. Press the Channel Up or Channel Down button to cancel the opposite code and select a privacy code from the active system for the selected channel.
7.Choose one of the following:
a.Press the Hi•Low/Enter button to enter the channel/privacy code in the selected memory location and return to Step 1 to program another memory location.
b.Press the Lock/Mode button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.
c.Press the Talk button to enter the channel/privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the radio will enter Standby mode on the channel/privacy code just entered.
12 English
Nothing comes close to a Cobra® 13
