Mode Functions
Operation
VibrAlert® and Call Alert
•
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently or both.
|
|
|
|
|
|
| Introduction | Operation | Customer Assistance | Warranty |
|
10 Call Tone Settings
•
You can choose from 10 different call tone settings to transmit a unique call alert.
Lock/Mode Button
Channel Buttons
To change call settings:
1.Press the Lock/Mode button until the Call Setting icon flashes on the display. The current setting (“01” vibrate + ring, “02” vibrate only or “03” ring only)
is displayed.
2.Press the Channel Up or Channel Down button to change the call setting.
3.Choose one of the following:
VibrAlert® + Ring
VibrAlert® Only
Ring Only
Lock/Mode Button |
| To change a call tone setting: | |
| 1. | Press the Lock/Mode button until the | |
|
|
| letter “C” and the current call tone number |
|
|
| (01 through 10) is displayed. |
| 2. | Press the Channel Up or Channel Down | |
Call Tone Setting | |||
|
|
| button to hear the other call tone settings. |
|
| 3. Choose one of the following: | |
|
|
| a. Press the Lock/Mode button to enter the |
|
|
| new setting and proceed to other functions. |
Channel Buttons |
|
| |
|
|
| b. Press the Hi•Low/Enter button to enter the |
|
|
| new setting and return to Standby mode. |
a. Press the Lock/Mode button to enter the new setting and proceed to other functions.
b. Press the Hi•Low/Enter button to enter the new setting and return to Standby mode.
22 English
Roger Beep Confirmation Tone
•
Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.
Lock/Mode Button To turn roger beep on or off:
1.Press the Lock/Mode button until the Roger Beep icon flashes on the display. The current on or off setting is displayed.
Roger Beep On 2. Press the Channel Up or Channel Down button to select roger beep on or off.
3.Choose one of the following:
a. Press the Lock/Mode button to enter
Channel Buttonsthe new setting and proceed to other functions.
b. Press the Hi•Low/Enter button to enter the new setting and return to Standby mode.
Nothing comes close to a Cobra® 23
