Click Tools Change Device Settings | Extron electronic IPL T S1

Step thirteen: change device settings (if desired)

If for any reason you need to change any of the previously configured settings:

1. Click Tools > Change Device Settings.

2. Select a device.

3. Click Settings to open the Settings drop-down listing.

4. Select and change the desired setting(s), for example:

Set Mail Server..., Set Gateway..., Set Subnet Mask..., etc.

NUse Set Mail Server... in the drop-down listing to identify the local mail server's IP address, domain, and passwords.

IPL T S Series Interfaces • Software Setup 3-21

Image 41

Extron electronic IPL T S1, IPL T S4 Step thirteen change device settings if desired, Click Tools Change Device Settings

Contents

Interfaces IPL T S Series Safety Instructions English Precautions 安全须知中文 Page Table of Contents Table of Contents, cont’d IPL T S Series Interfaces One IPL T S Series Products IntroductionAbout this Manual IPL T S1 Introduction, cont’d Global Configurator Click the Global Configurator icon Installing Global ConfiguratorSystem requirements Click the Download GCSWxxxxx.exe button Introduction, cont’d Two Front Panel Hardware Setup Rear Panel Local Area Network LAN Connection Hardware Setup, cont’d Power Connection Serial Device Connection RJ-45 Connector Straight-through Cable Captive screw connector Hardware Setup, cont’dPin D connector IPL T S6 Hardware Setup, cont’d Three Creating a Global Configurator Project File Software SetupStep one download device drivers Click the Add Driver Subscriptions button Click the right arrow Subscribe button Step two create a new project Software Setup, cont’d IPL T S Series Interfaces Software Setup Click Make this device a GlobalViewer Host if desired Step three add a deviceClick Edit Add Device Click Auto Configure IP Address Step four define the location of the new device Step five save the new Global Configurator file Click Edit Contact Manager Software Setup, cont’d Configuring a New DeviceStep six configure contacts Click Edit Email Manager Step seven configure e-mail Click Add Driver Driver Configuration tab opensStep eight assign device drivers Step nine set scheduled actions and e-mail deliveries Click Apply Action IPL T S Series Interfaces Software Setup Click Apply Email/Contacts Step ten set monitored conditions Click Apply Condition Click Conditions Apply Email/Contacts Step eleven build the Global Configurator fileBuilding and Uploading a GC File Step twelve upload the Global Configurator file Set Mail Server..., Set Gateway..., Set Subnet Mask..., etc Step thirteen change device settings if desiredClick Tools Change Device Settings Step fourteen launch GlobalViewer Software Setup, cont’d Launching the GlobalViewer Interface IPL T S Series Interfaces Software Setup USA, Canada, South America Japan Central America Extron’s Warranty Extron USA East Setup Guide Checklist