455E.book Page 8 Thursday, March 20, 2003 7:44 PM
Using the Telephone
Power On/Off
Power on | Power off |
Press for more than | Press for more than |
2 seconds. *1 | 2 seconds. *2 |
*1 When 
button is released, the display changes to the standby mode. *2 The display goes blank.
Setting the Clock/Date
After a mains power failure the clock needs to be reset. Ensure that the 
icon is not flashing.
1 | 2 | "Input Command" |
|
Press MENU. | Search/Select |
|
|
| "Setting Base". |
| |
| Time |
|
|
Enter time. | Select AM or PM.*2 |
| |
3 OR | Date | 4 |
|
twice |
| Press OK. | |
Enter day, month then year.*3 | |||
•To exit the operation, press 
any time.
*1 You can enter the time in 12 hour clock or 24 hour clock.
| For example, to set 7:15 (12 hour clock), press 0 | 7 | 1 | 5 . |
| If you enter the time in 24 hour clock, go to step 4. |
|
|
|
*2 | If AM or PM is not selected, display will show 24 hour clock even if the time has been | |||
| entered in 12 hour clock. |
|
|
|
*3 | For example, to set the 16th of February, 2003, press | 1 | 6 | 0 2 0 3 . |
Making a Call
Pre-dialling Post-dialling
1 Phone Number *1 2 | 1 | 2 Phone Number |
Press TALK.*2 |
| Press TALK.*2 |
|
|
|
*1 If you need to make a correction, press CLEAR. The digit is cleared to the left, then you can enter numbers. All digits are cleared if you press and hold CLEAR.
*2 You can also press SPEAKERPHONE to make a call.
8
