LBMs Priority
The 802.1p priority to be set in the transmitted LBMs. If not specified it uses the same priority as CCMs and LTMs sent by the MEP.
Click Apply to implement changes made.
CFM Linktrace Settings
This window is used to configure the CFM linktrace settings on the Switch.
To view this window, click L2 Features > CFM > CFM Linktrace Settings as shown below:
| Figure 3 - 84 CFM Linktrace Settings window |
The following parameters can be configured: | |
|
|
Parameter | Description |
|
|
MEP Name | The name of the Maintenance End Point. |
|
|
MEP ID | The ID for the Maintenance End Point between 1 and 8191. |
|
|
MD Name | The Maintenance Domain Name. |
|
|
MA Name | The Maintenance Association Name. |
|
|
MAC Address | The destination MAC address. |
|
|
TTL | The linktrace message TTL value. The default value is 64. |
|
|
PDU Priority | The 802.1p priority to be set in the transmitted LTM. If the PDU Priority is not specified, it uses |
| the same priority as CCMs sent by the MA. |
|
|
Click Apply to implement changes made.
127
