Figure 6 - 30 CPU Access Profile Detail Information window for Ethernet The window shown below is the Add CPU ACL Profile window for IP (IPv4).
Figure 6 - 31 Add CPU ACL Profile window for IP (IPv4)
The following parameters may be configured for the IP (IPv4) filter.
Parameter | Description |
|
|
Select Profile ID | Use the |
| can be set from 1 to 5. |
Select ACL Type | Select profile based on Ethernet (MAC Address), IPv4 address, IPv6, or packet content |
| mask. This will change the menu according to the requirements for the type of profile. |
| Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header. |
| Select IPv4 to instruct the Switch to examine the IPv4 address in each frame's header. |
| Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header. |
| Select Packet Content Mask to specify a mask to check the content of the packet header. |
802.1Q VLAN | Selecting this option instructs the Switch to examine the VLAN part of each packet header |
| and use this as the, or part of the criterion for forwarding. |
IPv4 DSCP | Selecting this option instructs the Switch to examine the DiffServ Code part of each packet |
| header and use this as the, or part of the criterion for forwarding. |
Source IP Mask | Enter an IP address mask for the source IP address. |
208
