Click Apply to implement any changes made and <<Back to return to the MLD Snooping Settings window. To modify the router port settings click the hyperlinked Modify Router Port as shown below:
Figure 3 - 43 MLD Snooping Router IP Settings – Modify window
MLD Snooping Rate Limit Settings
This window is used to configure the rate of MLD control packets that are allowed per port or per VLAN.
To view this window, click L2 Features > MLD Snooping > MLD Snooping Rate Limit Settings, as shown below:
|
| Figure 3 - 44 MLD Snooping Rate Limit Settings window |
|
The following parameters may be viewed or modified: |
| ||
|
|
|
|
Parameter | Description |
| |
|
|
|
|
Port List |
| Specifies a port or range ports to configure or display. |
|
|
|
|
|
VLAN List |
| Specifies a VLAN or range of VLANs to configure or display. |
|
|
|
|
|
Rate Limit |
| Specifies the rate of MLD control packets that the switch can process on a specific port. |
|
|
| The rate is specified in packets per second. The packet that exceeds the limited rate will be |
|
|
| dropped. The default setting is No Limit. |
|
Click Apply to implement new changes. To modify the rate limit click the corresponding Edit button.
100
