
|
|
| ||
|
|
|
|
|
| Max Hops |
| Used to set the number of hops between devices in a spanning tree region before the |
|
|
|
| BPDU (bridge protocol data unit) packet sent by the Switch will be discarded. Each |
|
|
|
| switch on the hop count will reduce the hop count by one until the value reaches zero. |
|
|
|
| The Switch will then discard the BPDU packet and the information held for the port will |
|
|
|
| age out. The user may set a hop count from 1 to 20. The default is 20. |
|
|
|
|
|
|
| NNI BPDU Address |
| Configure NNI port address. |
|
|
|
| dot1d – Specifies GVRP’s bpdu MAC address of NNI port using the definition of 802.1d. |
|
|
|
| dot1ad – Specifies GVRP’s pdu MAC address of NNI port using the definition of |
|
|
|
| 802.1ad. |
|
|
|
|
|
|
Click Apply to implement changes made.
NOTE: The Hello Time cannot be longer than the Max. Age. Otherwise, a configuration error will occur. Observe the following formulas when setting the above parameters:
Max. Age ≤ 2 x (Forward Delay - 1 second)
Max. Age ≥ 2 x (Hello Time + 1 second)
110