DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

RSPAN Settings

This table controls the RSPAN function. The purpose of the RSPAN function is to mirror the packets to a remote switch. The packet travels from the switch where the monitored packet is received, through the intermediate switch, then to the switch where the sniffer is attached. The first switch is also named the source switch. RSPAN VLAN mirroring will only work when RSPAN Global Settings are enabled. RSPAN redirect function will work when RSPAN is enabled and at least one RSPAN VLAN has been configured with redirect ports.

To view this window, click L2 Features > RSPAN Settings as shown below:

Figure 3 - 17 RSPAN Settings window

Enter the VLAN Name or VID and click Create. To remove an entry click Delete, to modify an entry click the corresponding Modify button.

Figure 3 - 18 RSPAN Settings window – Edit

Enter the Source Ports or Redirect Ports you wish to Add or Delete and click Apply. To return to the RSPAN Settings window click <<Back.

GVRP Settings

The table allows the user to determine whether the Switch will share its VLAN configuration information with other GARP VLAN Registration Protocol (GVRP) enabled switches. In addition, Ingress Checking can be used to limit traffic by filtering incoming packets whose PVID do not match the PVID of the port. Results can be seen in the table under the configuration settings, as seen below.

To view this window, click L2 Features > GVRP Settings as shown below:

Figure 3 - 19 GVRP Settings window

84

Page 95
Image 95
D-Link DGS-3700 user manual Rspan Settings, Gvrp Settings