DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Figure 3 - 45 MLD Snooping Rate Limit Settings – Edit window

Enter the new rate limit and click Apply.

MLD Snooping Static Group Settings

This window is used to configure the MLD Snooping static group information on the Swtich:

To view this window, click L2 Features > MLD Snooping > MLD Snooping Static Group Settings, as shown below

Figure 3 - 46 MLD Snooping Static Group Settings window

The following parameters may be viewed or modified:

Parameter

Description

 

 

 

 

VLAN Name

Specifies the name of the VLAN for which to configure the MLD snooping static group

 

 

information.

 

VLAN List

Specifies the list of the VLAN IDs for which to configure the MLD snooping static group

 

 

information.

 

IPv6 Address

Specifies the static group IPv6 address for which to configure the MLD snooping static

 

 

group information.

 

Click Create to create a new entry. To search for an entry enter the information and click Find. To view all previously configured entries click View All.

MLD Multicast Group Profile Settings

This table allows the user to create MLD multicast group profiles and specify multicast address lists on the Switch.

To view this window, click L2 Features > MLD Snooping > MLD Multicast Group Profile Settings as shown below:

101

Page 112
Image 112
D-Link DGS-3700 user manual MLD Snooping Static Group Settings, MLD Multicast Group Profile Settings, IPv6 Address