
Section 6
ACL
ACL Configuration Wizard
Access Profile List
CPU Access Profile List
ACL Finder
ACL Flow Meter
Access profiles allow you to establish criteria to determine whether or not the Switch will forward packets based on the information contained in each packet's header. These criteria can be specified on a basis of Packet Content, MAC address, or IP address.
Due to a chipset limitation, the Switch supports a maximum of 12 access profiles. The rules used to define the access profiles are limited to a total of 1536 rules for the Switch.
ACL Configuration Wizard
The ACL Configuration Wizard will aid with the creation of access profiles and ACL rules. The ACL Wizard will create the access rule and profile automatically.
To view this window, click ACL > ACL Configuration Wizard as shown below:
Figure 6 - 1 ACL Configuration Wizard window
The following parameters can be configured.
ParameterDescription
Type | Select the type of ACL you wish to create, either normal or CPU. |
|
|
Profile Name | Select a unique Profile Name for this profile set. |
|
|
Profile ID | Enter a unique identifier number for this profile set. This value can be set from 1 to 12. |
|
|
Access ID | Type in a unique identifier number for this access. This value can be set from 1 to 128. |
|
|
187