DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Traffic Segmentation

Traffic segmentation is used to limit traffic flow from a single port to a group of ports on either a single switch or a group of ports on another switch in a switch stack. This method of segmenting the flow of traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of directing traffic that does not increase the overhead of the Master switch CPU. This page allows you to view which port on a given switch will be allowed to forward packets to other ports on that switch. Select a port number from the drop down menu to display the forwarding ports. To configure new forwarding ports for a particular port, select a port from the menu and click Apply.

To view this window, click L2 Features > Traffic Segmentation as shown below:

Figure 3 - 26 Traffic Segmentation window

The following fields can be set

ParameterDescription

From Port / To Port

Check the corresponding boxes for the port(s) to transmit packets.

 

 

Forward Portlist

Check the boxes to select which of the ports on the Switch will be able to forward packets.

 

These ports will be allowed to receive packets from the port specified above.

Clicking the Apply button will enter the combination of transmitting port and allowed receiving ports into the Switch's Current Traffic Segmentation Table.

90

Page 101
Image 101
D-Link DGS-3700 user manual Traffic Segmentation, Forward Portlist