DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

 

 

 

 

 

 

 

 

 

Precedence bits field in IPv4.

 

 

 

 

 

 

 

Rx Rate (1-15624)

 

Use this to limit Rx bandwidth for the profile being configured. This rate is implemented

 

 

 

 

using the following equation: 1 value = 64Kbit/sec. (ex. If the user selects an Rx rate of 10

 

 

 

 

then the ingress rate is 640Kbit/sec.) The user many select a value between 1 and 15624 or

 

 

 

 

tick the No Limit check box. The default setting is No Limit.

 

 

Time Range Name

 

Tick the check box and enter the name of the Time Range settings that has been previously

 

 

 

 

configured in the Time Range Settings window. This will set specific times when this

 

 

 

 

access rule will be implemented on the Switch.

 

 

Counter

 

Enable or disable the counter settings.

 

 

 

 

 

 

 

Ports

 

Specifies that the access rule will take effect on one port or a range of ports.

 

 

 

 

 

 

 

VLAN Name

 

Specifies the access rule will take effect on the VLAN Name specified.

 

 

VLAN ID

 

Specifies the access rule will take effect on the VLAN ID specified.

 

Click Apply to display the following Access Rule List window.

Figure 6 - 20 Access Rule List (IPv6)

To view the configurations for previously configured rule click on the corresponding Show Details Button which will display the following Access Rule Details window.

Figure 6 - 21 Access Rule Detail Inforamtion (IPv6)

To configure the Packet Content ACL select Packet Content in the Add ACL Profile window, enter the Profile ID and Profile Name into the top half of the screen in the Add ACL Profile window and click Select, the following window will appear.

201

Page 212
Image 212
D-Link DGS-3700 user manual Access Rule List IPv6