D-Link DGS-3700 802.1v Protocol Vlan Settings, 802.1p Priority, Check the Select All Ports box

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

802.1v Protocol VLAN Settings

The table allows the user to configure Protocol VLAN settings. The lower half of the table displays any previously created settings.

To view this window, click L2 Features > 802.1v Protocol VLAN > 802.1v Protocol VLAN Settings as shown below:

	Figure 3 - 16 Protocol VLAN Settings window
The following fields can be set:
Parameter	Description
Group ID	Click the corresponding radio button to select a previously configured Group ID from the drop-
	down menu.
Group Name	Click the corresponding radio button to select a previously configured Group Name from the
	drop-down menu.
VID (1-4094)	Click the radio button to enter the VID. This is the VLAN ID that, along with the VLAN Name,
	identifies the VLAN the user wishes to create.
VLAN Name	Click the radio button to enter a VLAN Name. This is the VLAN Name that, along with the
	VLAN ID, identifies the VLAN the user wishes to create.
802.1p Priority	This parameter is specified if you want to re-write the 802.1p default priority previously set in
	the Switch, which is used to determine the CoS queue to which packets are forwarded to.
	Once this field is specified, packets accepted by the Switch that match this priority are
	forwarded to the CoS queue specified previously by the user.
	Click the corresponding box if you want to set the 802.1p default priority of a packet to the
	value entered in the Priority (0-7) field, which meets the criteria specified previously in this
	command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have
	its incoming 802.1p user priority re-written to its original value before being forwarded by the
	Switch.
	For more information on priority queues, CoS queues and mapping for 802.1p, see the QoS
	section of this manual.
Port List (e.g.: 1-6)	Select the specified ports you wish to configure by entering the port number in this field, or
	check the Select All Ports box.
Search Port List	This function allows the user to search all previously configured port list settings and display
	them on the lower half of the table. To search for a port list enter the port number you wish to
	view and click Find. To display all previously configured port lists on the bottom half of the
	screen click the Show All button, to clear all previously configured lists click the Delete All
	button.

83