
|
|
| |
|
|
| |
|
| default quality of service or real time service packets. | |
|
|
| |
| Time Range | Tick the check box and enter the name of the Time Range settings that has been previously | |
| Name | configured in the Time Range Settings window. This will set specific times when this access rule | |
|
| will be implemented on the Switch. | |
|
|
| |
| Ports | Specifies the access rule can take effect on one port or a range of ports. | |
|
|
|
|
To view the settings of a previously correctly configured rule, click the corresponding Show Details button on the CPU Access Rule List window to view the following window:
Figure 6 - 45 CPU Access Rule Detail Information window for IPv6
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for IP, open the CPU Access Profile List window and click Add/View Rules for a Packet Content entry. This will open the following window.
Figure 6 - 46 CPU Access Rule List window for Packet Content
To remove a previously created rule, click the corresponding Delete Rules button. To add a new Access Rule, click the Add Rule button:
Figure 6 - 47 Add Access Rule window for Packet Content To set the Access Rule for Packet Content, adjust the following parameters and click Apply.
216