To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for IP, open the CPU Access Profile List window and click Add/View Rules for an IP entry. This will open the following window.
Figure 6 - 40 CPU Access Rule List window for IP
To remove a previously created rule, click the corresponding Delete Rules button. To add a new Access Rule, click the Add Rule button:
| Figure 6 - 41 Add Access Rule window for IP |
|
To set the Access Rule for IP, adjust the following parameters and click Apply |
| |
|
|
|
Parameter | Description |
|
|
|
|
Access ID | Type in a unique identifier number for this access. This value can be set from 1 to 100. |
|
|
|
|
Action | Select Permit to specify that the packets that match the access profile are forwarded by the |
|
| Switch, according to any additional rule added (see below). |
|
| Select Deny to specify the packets that match the access profile to be filtered. |
|
|
|
|
DSCP | Selecting this option instructs the Switch to examine the DiffServ Code part of each packet |
|
| header. Enter a value between 0 and 63. |
|
Time Range | Tick the check box and enter the name of the Time Range settings that has been previously |
|
Name | configured in the Time Range Settings window. This will set specific times when this access rule |
|
| will be implemented on the Switch. |
|
|
|
|
Ports | Specifies the access rule can take effect on one port or a range of ports. |
|
|
|
|
To view the settings of a previously correctly configured rule, click the corresponding Show Details button on the CPU Access Rule List window to view the following window:
214
