DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Show VLAN Ports

This window allows the VLAN status for each of the Switch's ports to be viewed by VLAN. Enter a VID (VLAN ID) in the field at the top of the window and click the Find button.

To view this window, click Monitoring > VLAN > Show VLAN Ports as shown below:

Figure 7 - 29 Show VLAN Ports window

IGMP Snooping

The following windows are used to configure the IGMP Snooping settings of the Switch.

Browse IGMP Router Port

This window displays which of the Switch’s ports are currently configured as router ports. A router port configured by a user (using the console or Web-based management interfaces) is displayed as a static router port, designated by S. A router port that is dynamically configured by the Switch is designated by D, while a Forbidden port is designated by F. Enter a VID (VLAN ID) in the field at the top of the window and click the Find button.

To view this window, click Monitoring > IGMP Snooping > Browse IGMP Router Port as shown below:

Figure 7 - 30 Browse IGMP Router Port window

IGMP Snooping Group

This window allows the Switch’s IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The number of IGMP reports that were snooped is displayed in the Reports field.

To view this window, click Monitoring > IGMP Snooping > IGMP Snooping Group as shown below:

243

Page 254
Image 254
D-Link DGS-3700 user manual Show Vlan Ports, Browse Igmp Router Port, Igmp Snooping Group