DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Figure 5 - 9 Port Security Port Settings window

The following parameters can be set:

Parameter Description

From Port / To Port

A consecutive group of ports may be configured starting with the selected port.

 

 

Admin State

This pull-down menu allows you to enable or disable Port Security (locked MAC address table

 

for the selected ports).

Lock Address

This pull-down menu allows you to select how the MAC address table locking will be

Mode

implemented on the Switch, for the selected group of ports. The options are:

 

Permanent – The locked addresses will not age out after the aging timer expires.

 

DeleteOnTimeout – The locked addresses will age out after the aging timer expires.

 

DeleteOnReset – The locked addresses will not age out until the Switch has been reset.

 

 

Max. Learning

The number of MAC addresses that will be in the MAC address-forwarding table for the

Address (0-16384)

selected switch and group of ports.

 

 

Click Apply to implement changes made.

Port Security VLAN Settings

This table is used to set the maximum port-security entries that can be learned on a specific VLAN.

To view this window, click Security > Port Security > Port Security FDB Entries as shown below:

Figure 5 - 10 Port Security VLAN Settings window

The following parameters can be set:

152

Page 163
Image 163
D-Link DGS-3700 user manual Port Security Vlan Settings, Admin State, Lock Address, Max. Learning