D-Link DGS-3700 user manual Parameter Description Select Profile, Select ACL, Offset

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

To view the settings of a previously correctly created profile, click the corresponding Show Details button on the CPU Access Profile List window to view the following window:

Figure 6 - 34 CPU Access Profile Detail Information window for IPv6 The window shown below is the Add CPU ACL Profile window for Packet Content.

	Figure 6 - 35 Add CPU ACL Profile window for Packet Content
The following parameters may be configured for the Packet Content filter.
Parameter	Description
Select Profile	Use the drop-down menu to select a unique identifier number for this profile set. This value can
ID	be set from 1 to 5.
Select ACL	Select profile based on Ethernet (MAC Address), IPv4 address, IPv6, or packet content mask.
Type	This will change the menu according to the requirements for the type of profile.
	Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
	Select IPv4 to instruct the Switch to examine the IPv4 address in each frame's header.
	Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
	Select Packet Content Mask to specify a mask to check the content of the packet header.
Offset	This field will instruct the Switch to mask the packet header beginning with the offset value
	specified:
	• 0-15– Enter a value in hex form to mask the packet from the beginning of the packet to

211