DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
62
Figure 2 - 78 DDM Settings window
The following fields can be configured:
Parameter Description
Trap Log Specifies whether or not to send the trap and log, when the operating par ameter exc eeds the
alarm or warning threshold.
From Port / To Port Specifies a port or range of ports to be configured.
State Specifies to Enable or Disable the DDM settings state.
Shutdown Specifies whether or not to shutdown the port, when the operating parameter exceeds the
Alarm or Warning threshold.
Click Apply to implement changes made.
DDM Temperature Threshold Settings
This table is used to configure the DDM Temperature Threshold Settings f or specific ports on the Switch.
To view this window, click Configuration > DDM > DDM Temperature Threshold Settings as shown below:
Figure 2 - 79 DDM Temperature Threshold Settings window
The following fields can be configured:
Parameter Description
From Port / To Port Specifies a port or range of ports to be configured.
High Alarm This is the highest threshold for the alarm. When the operating parameter rises above this
value, action associated with the alarm will be taken.
Low Alarm This is the lowest threshold for the alarm. When the operating param eter falls below this value,
action associated with the alarm is taken.
High Warning This is the highest threshold for the warning. When the operating parameter rises abov e this
value, action associated with the warning is taken.
Low Warning This is the lowest threshold for the warning. When the operating parameter falls bel ow this
value, action associated with the warning is taken.
Click Apply to implement changes made.